JNQ series mud gun is an important part of drilling fluid solid control system. It can used to agitate drilling fluid in tank by pumped-in drilling fluid under certain pressure and flow rate. The mud gun can agitate fluid in dead corners where mechanical agitators cannot reach, and mix the drilling fluid even. It also can used to clean out deposited mud in tank bottom.
Drilling fluid under certain pressure and flow rate is taken into the mud gun by centrifugal sand pump, and spouts out through the jet nozzle,then it can be agitated and mixed by turning the rotary handle.It also can be used to clean out the deposited sand at tank bottom.
III. Main parameters
Model | JNQ-80-1 | JNQ-80-6.4 | JNQ-50-1 | JNQ-50-6.4 |
Discharge capacity | 60 m3/h | 60 m3/h | 50 m3/h | 50 m3/h |
Nominal diameter | 80 mm | 80 mm | 50 mm | 50 mm |
Working pressure | ≤1 MPa | ≤6.4 MPa | ≤1 MPa | ≤6.4 MPa |
Adjustable range | 0~330° | 0~330° | 0~330° | 0~330° |
Length | According to the mud tank depth | |||
Weight | 55kg | 70kg | 55kg | 65kg |